Training: Heat losses EN 12831 and their calculation with IntegraCAD 2005

 

The EN 12831 standard has been adopted in 2003. and it consists of a calculation part which is mandatory for all states and an optional part - the national annex. Since Croatia has not adopted such an annex so far, IntegraCAD also uses the general calculation procedure.

The EN 12831 is quite different from the “old” DIN 4701 so Impuls d.o.o has regular trainings for engineers to help with the transition. During the training the attendants will learn about the standard guidelines, the practical application and the calculation procedure in IntegraCAD. The training is supported by examples and headed by our technical assistant team. This one day training takes place in a fully equipped room where every attendant has his own computer to work on. All attendants will receive a written summary with all the relevant information on the EN 12831 standard (formulas, explanations etc.) and instructions on making the calculation in IntegraCAD.

 

 

The price is 100 EUR + VAT

 

 

The schedule

9:00-10:30        - Introduction to EN 12831

                        - The general calculation method

10:30-10:45       - Break

10:45-12:15       - Introduction to IntegraCAD

- Description of the calculation process in IntegraCAD

12:15-12:30       - Break

12:30-15:00       - Making a test calculation with the program                  

- Questions, suggestions, discussion

 

Picture 1: Default settings

 

 

Picture 2. : Heat loss calculation example for one room in IntegraCAD 2005