Training: Heat gains draft VDI 2078 and making the calculation using the IntegraCAD software

The VDI 2078 draft for heat load calculations has been a basis for calculating the heat loads in Europe for years. This German recommendation has not been accepted as a standard yet, but it is applied throughout the whole Europe. IntegraCAD software package is now equipped with the calculation module for heat loads according to the detail calculation method from VDI 2078. Mechanical engineers deal with heat gains much more and since this is the valid recommendation for Europe, Impuls d.o.o. has decided to start a training programme about the VDI 2078 and its usage. During the training the attendants will learn about the guidelines from the draft, the appliance in the practice and making the calculation in the IntegraCAD software. The training, which is corroborated with examples, is lead by a technical assistant. This one day training takes place in a fully equipped room where every attendant has his own computer to work on. All attendants will receive a written summary with all the relevant information on the VDI (formulas, explanations etc.) and also instructions on making the calculation in IntegraCAD.

The price is 890 KN

The schedule

9:00-10:30        - Introduction to VDI 2078

                        - The procedure of the detail method calculation

10:30-10:45       - Break

10:45-12:15       - Introduction to IntegraCAD software

- Description of the calculation process in IntegraCAD

12:15-12:30       - Break

12:30-15:00       - Making the calculation using the program                    

- Questions, suggestions, discussion

Picture 1 : Adjusting the default values